Operation Manual

11
5.6 Instructions on how to access the flue through the stove
Ensure clean fire box.
Lift the throat plate from the
retaining brackets and
carefully remove.
Lift and remove the
deflector plate. You can
now sweep through the
stove.
To replace the fire bricks,
please repeat steps 1 – 3 in
reverse.
In the case of chimney fire
If the wrong or unseasoned wood is used, it is possible that a chimney fire can occur due
to the accumulation of deposits inside the chimney.
Immediately close all air regulators on the stove and call the fire brigade.
If a chimney fire was to occur, an experienced professional should be employed to check
the entire flue system.