Operation Manual

10
5.4 Rotating the stove
Rotating stoves
can be rotated up to
90° when there are no obstructions
around the stove. Pay special attention
to the necessary security distances to
combustible and / or load-bear
ing
walls, and to c
ombustible furnishings.
The turning procedure must be carried
out when the stove is cold.
The required safety distance in the
radiation range of the glass must be at
least 135 cm!
5.5 Cleaning and maintenance
The stove can be cleaned only when it is cold.
Pay attention while cleaning your stove not to damage, scratch or break essential parts.
For cleaning steel parts use non-abrasive detergents and a soft rag, and after cleaning
wash it well to avoid the deposit of detergent which can damage material.
Cleaning the glass should be done when the stove is cold, using normal detergent for
washing the glass. In the case of solid deposits that should be removed, we recommend to
use detergents that are sold in stores, and that are intended for that use.
After washing, wipe over with clean water and if there are condensates, do not wait until
they are dried, rather wipe them immediately.
Attention: The stove paint only achieves its ultimate strength after reaching its rated
temperature a few times. To avoid damaging the paint, it is recommended to clean the
stove surface only when the paint achieves its ultimate hardness.
It is important to have the chimney regularly checked and cleaned by a qualified chimney
sweep.
Picture 2: security lock against unintentional twisting of
the stove.
Push the lever upwards to loosen the rotation lock