User Manual

optris CS – E2012-10-B
7
Electrical Specifications
Used pin Function
OUT IN/ OUT
x Analog 0-5 V
1)
or 0-10 V
2)
/ scalable
x Alarm output voltage adjustable; N/O or N/C
x Alarm 3-state alarm output (three voltage level for no alarm, pre-alarm, alarm)
x Alarm programmable open collector output [0-30 V DC/ 50 mA]
4)
x Temp. Code Temp. Code Output (open collector [0-30 V DC/ 50 mA]
4)
x Input programmable functions:
 external emissivity adjustment
 ambient temperature compensation
 triggered signal output and peak hold function
5)
x x Serial digital
3)
uni- (burst mode) or bidirectional
OUT t/c K Analog Thermocouple output type K (only at model CSTCLT15); alternatively
selectable to the mV output (software necessary)
Status LED green LED with programmable functions:
 alarm indication (threshold independent from alarm outputs)
 automatic aiming support
 self diagnostics
 temperature code indication
Vcc adjust mode 10 adjustable emissivity and alarm values by variation of supply voltage/
Service mode for analog output