User Manual

optris CS – E2012-10-B
3
PLEASE NOTE: Never use cleaning
compounds which contain solvents (neither
for the lens nor for the housing).
Description
The sensors of the optris CS series are non-contact infrared temperature sensors.
They calculate the surface temperature based on the emitted infrared energy of objects [► Basics of
Infrared Thermometry].
The sensor housing of the optris CS is made of stainless steel (IP63) and contains the complete sensor
electronics. The optris CS has a fixed mounted connection cable.
Scope of Supply
 CS incl. connection cable, two mounting nuts and operators manual
Maintenance
Lens cleaning: Blow off loose particles using clean
compressed air. The lens surface can be cleaned with a
soft, humid tissue moistened with water or a water based
glass cleaner.
The sensors CS are sensitive optical systems. Please use only the thread for mechanical installation.
Avoid mechanical violence on the head – this may destroy the system (expiry of warranty).