User Manual

optris CS – E2012-10-B
8
Output impedances min. 10 kΩ load impedance
Current draw 10 mA
Power supply 5...30 VDC
1)
0...4,6 V at supply voltage 5 VDC; also valid for alarm output
2)
only at supply voltage ≥ 11 V
3)
inverted RS232, TTL, 9,6 kBaud
4)
loadable up to 500 mA if the mV output is not used
5)
High level: > 0,8 V/ Low level: < 0,8 V
1)
only at model CSTCLT15 / The t/c wires are indicated with an additional cable marker to avoid wrong connections due to the identical
cable colors of other wires (white, green).
Power supply [white]
Analog output/ TxD (5 V)/ Alarm output [yellow]
Analog input/ RxD (5 V)/ Open collector output [green]
Ground () [brown]
Thermocouple output type K (+) [green]
1)
Thermocouple output type K (-) [white]
1)
Shield [black]