User Manual

Laser Sighting
The CSlaser has an integrated double laser aiming. Both of the laser beams are marking the exactly location
and size of the measurement spot, independent from the distance. At the focus point of the according optics
[► Optical Charts] both lasers are crossing and showing as one dot the minimum spot. This enables a perfect
alignment of the sensor to the object.
WARNING: Do not point the laser directly at the eyes of persons or animals!
Do not stare into the laser beam. Avoid indirect exposure via reflective
surfaces!
The su
pply line for the sighting laser must be led via a switch or pushbutton,
which has to be installed max. 2m away from installation site of the sensor.
The laser can be activated/ deactivated via this, by the user on site to be installed switch, or via the software.
At ambient temperatures >50 °C the laser will switch off automatically.
optris CSlaser – E2010-07-B
24