User Manual

Water Cooled Housing
To avoid condensation on the optics an air
purge collar is recommended.
Water cooled housing [ACCTLW]
Hose connection: 6x8 mm
Thread (fitting): G 1/8 inch
The CSlaser can be used at ambient temperatures up to 85 °C without cooling. For applications, where the
ambient temperature can reach higher values, the usage of the optional water cooled housing is recommended
(operating temperature up to 175 °C). The sensor should be equipped with the optional high temperature cable
(operating temperature up to 180 °C).
► All accessories can be ordered using the according part numbers in brackets [ ].
optris CSlaser – E2010-07-B
17