Instruction Manual

WARNING: -RISK OF ELECTRIC SHOCK!!
Disconnect power at source prior to wiring, re-lamping or servicing in any way.
1. The light string kits are supplied with an attached two prong plug that will only fit into a two prong outlet.
Do not alter the plug.
STRING LIGHT INSTALLATION INSTRUCTIONS
INSTALLATION METHODS
1.Using a Guide Wire with S-hooks or zip ties(not included)
2.Attached to a Structure
RE-LAMPING STRING LIGHTS
WARNING-RISK OF ELECTRICSHOCK!! Disconnect power at source prior to re-lamping String Lights.
For outdoor String Lights, do NOT re-lamp light strings during rain or when wet.
1.Re-lamp String Lights only during dry and calm weather conditions.
2.Unscrew existing lamps by lightly holding the socket in one hand and twisting the lamp counterclockwise. Lamps
may be tight in the sockets. This is normal to prevent moisture from getting into socket.
3.Replace with medium base lamp. Screw bulb into socket clockwise until top of socket forms a tight seal around bulb
and bulb makes solid contact with socket. Do not exceed 1100 watts all sets combined. Suitable for Incandescent,
CFL, LED or CCL lamps.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: [phone];
Attach guide wire to
Structural support
Guide Wire
(not included)
S-hooks or zip ties
(not included)
Attach guide wire to
structural support