Operation Manual

English
62
USING THE PROJECTOR
Power Mode (Standby)
Set the power mode setting.
Active: Choose “Active” to return to normal standby. 
Eco.: Choose “Eco.” to save power dissipation further < 0.5W. 
Note:
If the “Signal Power On” option is turned “On” or the “Audio Out (Standby)” option is turned “On”, the 
power consumption of the projector in standby mode will be over 3W.
The fans will still run in active standby if audio loop through / signal power on is enabled. 
Exit
Choose “Exit” to exit the menu.