Operation Manual
English
60
USING THE PROJECTOR
Options remote settings menu
User 1
OPTIONS
Exit
Remote Settings
Zoom
User 2
User 3
IR Function
Test Pattern
Info.
On
USER 1
Assign the default function for USER1. The default value is "Test Pattern".
User 1
Test Pattern
Press into the next menu and then use or to select "HDMI2", "VGA2" (XGA only), "S-Video
(XGA only)", "Test Pattern", "Zoom", or "Info" item.
USER 2
Assign the default function for USER 2. The default value is "Zoom".
User 2
Zoom
Press into the next menu and then use or to select “HDMI2”, “VGA2” (XGA only), “S-Video
(XGA only)”, “Test Pattern”, “Zoom”, or “Info” item.
USER 3
Assign the default function for USER 3. The The default value is "Info.".
User 3
Info.
Press into the next menu and then use or to select “HDMI2”, “VGA2” (XGA only), “S-Video
(XGA only)”, “Test Pattern”, “Zoom”, or “Info” item.
IR Function
Set the IR function setting.
On: Choose "On", the projector can be operated by the remote control from front or top IR receiver.
Front: Choose "Front", the projector can be operated by the remote control from front IR receiver.
Top: Choose "Top", the projector can be operated by the remote control from top IR receiver.
Off: Choose "Off", the projector can't be operated by the remote control from front or top IR receiver.
By selecting "Off", you will be able to use the Keypad keys.
Note:
“Front” and “Top” cannot be selected in standby mode.
IR mode can be switched to “NVIDIA 3D Vision” once implemented and veried by NVIDIA.