Operation Manual
English
52
USING THE PROJECTOR
Click “Properties”.5.
Type in the IP address and Subnet mask, then press “OK”.6.
Press the “Menu” button on the projector.7.
Use the 8. keys to select SETUP > Network > LAN Settings.
Enter the following connection parameters:9.
DHCP: Off ±
IP Address: 10.10.10.10 ±
Subnet Mask: 255.255.255.255 ±
Gateway: 0.0.0.0 ±
DNS: 0.0.0.0 ±
Press “Enter” to conrm settings.10.
Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher 11.
installed.
In the Address bar, input the projector’s IP address: 10.10.10.10.12.
Press “Enter”.13.