Operation Manual

English
48
USING THE PROJECTOR
Note:
The default user name and password is “admin”.
The steps in this section is based on Windows 7 operating system .
Making a direct connection from your computer to the projector*
Turn "Off" the DHCP option on the projector.1.
Congure the IP address, Subnet Mask, Gateway, and DNS on projector ("Network: LAN Settings").2.
IP Address
Subnet Mask
Gateway
DNS
Open 3. Network and Sharing Center page on your PC, and assign the identical network parameters to
your PC as set on projector. Click "OK" to save the parameters.
Open the web browser on your PC and type in to the URL eld the IP address, assigned in step 3. 4.
Then press "Enter" key.