Operation Manual
English
47
USING THE PROJECTOR
Setup network LAN settings menu
Network Status
SETUP
Exit
Network : LAN Settings
Off
Connected
MAC Address
DHCP
IP Address
Subnet Mask
Gateway
DNS
Network Status
Display the network connection status (read-only).
DHCP
Use this option to enable or disable the DHCP function.
On: Projector will obtain an IP address automatically from your network.
Off: To assign IP, Subnet Mask, Gateway and DNS conguration manually.
Exiting OSD will automatically apply the entered values.Note:
IP Address
Display the IP address.
Subnet Mask
Display subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
DNS
Display DNS number.
MAC Address
Display the MAC address (read-only).
Exit
Choose "Exit" to exit the menu.
How to use web browser to control your projector
Turn "On" the DHCP option on projector to allow a DHCP server to automatically assign an IP 1.
address.
Open the web browser in your PC and type in the projector's IP address ("Network: LAN Settings > IP 2.
Address").
Enter the user name and password, and click "Login".3.
The projector's conguration web interface opens.