Operation Manual

English
46
USING THE PROJECTOR
Security Timer
Can be select the time (Month / Day / Hour) function to set the number of hours the projector can be used. Once
this time has elapsed you will be requested to enter your password again.
Month
Exit
Security Timer
Day
Hour
Change the Password
First time  :
Press the “Enter” key to set the password.1.
The password has to be 4 digits. 2.
Use number button on the remote control or on-screen numeric keypad to enter your new password 3.
and then press the “Enter” key to conrm your password.
Change Password  :
(If your remote does not have a number keypad, please use the arrows to change each digit of
the password, then press the “Enter” key to conrm).
Press the “Enter” key to input old password.1.
Use the number button or on-screen numeric keypad to enter the current password and then press the 2.
“Enter” key to conrm.
Enter the new password (4 digits in length) using the number buttons on the remote control, then 3.
press the “Enter” key to conrm.
Enter the new password again and press the “Enter” key to conrm.4.
If the incorrect password is entered 3 times, the projector will automatically shut down.
If you have forgotten your password, please contact your local ofce for support.
The password default value is "1234" (rst time).Note:
REMOTE
Enter Current security Code (4 digitis)
Incorrect security code. Re-enter again. (Last Try)
Exit
Choose "Exit" to exit the menu.