Operation Manual
English
33
USING THE PROJECTOR
Image Advanced menu
Noise Reduction
IMAGE
Exit
Advanced
Dynamic Black
Off
Gamma
Color Temp.
Film
Warm
Color Space
Auto
RGB Gain/Bias
Color Matching
Signal
Noise Reduction
Select a lter sensitivity to be applied on noise. A higher value may improve noisy sources, but it will soften the
image.
Press the to decrease the noise in the image.
Press the to increase the noise in the image.
BrilliantColor
TM
This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while
providing true, more vibrant colors in picture.
Press the to stronger enhance the image.
Press the to less enhance the image.
Dynamic Black
Dynamic Black enables the projector to automatically optimize the brightness of the display during dark / light
movie scenes to be shown in incredible detail.
Gamma
This allows you to set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma
Adjustment steps to optimize your image output. Press the or to select the mode.
Film: for home theater.
Graphics: for PC / Photo source.
1.8 / 2.0 / 2.2 / 2.6: for specic PC / Photo source.
Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a
blackboard (green).
DICOM: This mode can project a monochrome medical image such as an X ray radiography, MRI, etc.
Color Temp.
Press the or to select a color temperature from Warm, Standard, Cool, or Cold.