Operation Manual

English
16
SETUP AND INSTALLATION
Connecting sources to the projector (XGA)
15
16
1
5 6
10
11
2
3 4
12
1314
17
7
8
9
18
No Item No Item
1. RJ-45 cable 10. Audio-In cable
2.
HDMI cable 11. Video cable
3. MHL cable 12. S-Video cable
4. VGA-In cable 13. RS-232C cable
5. Audio-In cable 14. VGA-Out cable
6. 3D emitter cable 15. Power cord
7. 12V DC Jack 16. USB Power Charger
8. Microphone cable 17. USB dongle
9. Audio Out cable 18. HDMI dongle
Note:
The projector needs to be powered off prior performing the connection to the HDMI3 / MHL connector. If 
not powered off manually, the projector will automatically power off as soon as the top cover is opened.
Due to size limit, we recommend using MHL powered HDMI dongles that are equal to or smaller than 
85 x 31 x 15mm. For HDMI dongles that require USB power, please ensure they are smaller than
65 x 31 x 15mm.
Alternatively, if your MHL powered dongle is larger than the dimensions suggested, use the extra HDMI 
port found on the back panel along with the USB port to power the dongle.