Owners Manual
Table Of Contents
English
39
USING THE PROJECTOR
Security menu
Security
Enable this function to prompt for a password before using the projector.
O: Choose “O” to be able to switch on the projector without password verication.
On: Choose “On” to use security verication when the turning on the projector.
Note: The default password is 1234.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
HDMI Link Settings menu
Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power o status using the HDMI Link control feature in the projector’s OSD. This
lets one device or multiple devices in a group power on or power o via HDMI Link Feature in a typical
conguration, your DVD player may be connected to the projector through an amplier or home theater
system.
HDMI
Amplier
HDMI
DVD Player
HDMI Link
Enable/disable the HDMI Link function. The inclusive TV, power on link, and power o link options will only
available if the setting is set to “On”.
Power On Link
CEC power on command.
Mutual: Both projector and CEC device will be turned on simultaneously.
PJ Device: The CEC device will be turned on only after the projector is switched on.
Device PJ: The projector will be switched on only after the CEC device is turned on.
Power O Link
Enable this function to let both HDMI Link and projector to be automatically turned o at the same time.
Test Pattern menu
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (o).