Owners Manual

English
33
USING THE PROJECTOR
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Gamma
Set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
 Film: For home theater.
 Video: For video or TV source.
 Graphics: For PC / Photo source.
 Standard(2.2): For standardized setting.
 1.8 / 2.0 / 2.4 / 2.6: For specic PC / Photo source. 2.4 and 2.6 can also be used for video content and
games to enable deeper contrast.
 3D: To experience the 3D e󰀨ect, you need to have 3D glasses. Make sure your PC/portable device
has a 120 Hz signal output quad bu󰀨ered graphics card and a 3D Player installed.
Note: These options are only available if the 3D mode function is disabled. In 3D mode, user can only select “3D”
for Gamma setting.
Color Settings
Congure the color settings.
 BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
 Color Temperature: Select a color temperature from D55, D65, D75, D83, D93, or Native.
 Color Matching: Select the following options:
± Color: Adjust the red (R), green (G), blue (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue: Adjust the color balance of red and green.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the “Color Matching” menu.
 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
 Color Space (HDMI Input 1 only): Select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
 Color Space (HDMI2/VGA/Home/Component only): Select an appropriate color matrix type from the
following: Auto, RGB(0-255), and RGB(16-235).