User Manual

English

MAINTENANCE

Installing and cleaning the dust lter

Installing the dust lter

Note: Dust lters are only required/supplied in the selected regions with excessive dust.

Cleaning the dust lter

We recommend you to clean the dust lter every three months. Clean it more often if the projector is used in a

dusty environment.

Procedure:

1. Switch off the power to the projector by pressing the “ ” button on the projector keypad or the remote

control.

2. Disconnect the power cord.

3. Pull the dust lter compartment downwards to remove it out from the bottom of the projector. 1

4. Carefully remove the air lter. Then clean or replace the dust lter. 2

5. To install the dust lter, reverse the previous steps.