User`s guide

English
15
Powering On / Off the Projector
Powering On the Projector
1. Slide the lens cover.
u
2. Connect the power cord to the
projector [A]. Connect the other
end to a wall outlet. Switch [B]
from off (O) to on ( — ).
3. The POWER and LAMP LEDs on the projector turn on. Ensure the
LAMP LED is on a steady (not ashing) orange and the POWER
LED is on a steady (not ashing) green. Press the POWER button
to turn on the projector
v
.
The startup screen displays in approximately 10 seconds.
4. Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically.
v If you connect multiple sources at the same time, press the
SOURCE button on the control panel or direct source key on
the remote control to switch between inputs.
v Turn on the
projector rst
and then se-
lect the signal
sources.
AV-MUTE
MENU VOLUME
POWER
LAMP
POWER
ENTER
K
E
Y
S
T
O
N
E
R
E
-
S
Y
N
C
S
O
U
R
C
E
K
E
Y
S
T
O
N
E
1
2
Power
Lens Cover
Power LED
Installation
B
A