Operation Manual

English

Setup

The Setup menu allows you to choose the default OSD language, modify boot-up

source, set sleep timer, and other options.

Setup

English

Language

Boot-Up Source

Direct Power On

Select Exit Enter

Sleep Timer

Advanced

Reset

Ver.

Auto

Off

Auto

Language



Set the language for the OSD. Options are: English, Germany, French,

Italian, Spanish, Portuguese, Polish, Dutch, Russian, Swedish, Greek,

中文 (繁), 中

文 (简)

, Janpanese, Korean, and Turkish.

Boot-Up Source



Select the projector’s boot-up source. Options are: Auto, VGA,

HDMI / MHL, and Media.

Note: If the Boot-Up Source is set to“Auto” then at each boot-up of the projector the input

source is always chosen the same as in previous session.

Direct Power On



Choose On to activate Direct Power mode. The projector will

automatically power on when AC power is supplied, without pressing the Power but-

ton on the projector control panel or on the remote control.

Sleep Timer



Set the countdown timer interval. The countdown timer will start, with or

without a signal being sent to the projector. The projector will automatically power off

when the countdown has ﬁnished. Options are: Auto, Off, 30 min, 1 hour, 3 hours,

8 hours, 12 hours.

Note: If the Sleep Timer is set to“Auto” then the project will automatically power off after 15

minutes if no signal has been detected.