Operation Manual

28
English
Phase

:
Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note: The Phase can be adjusted only in VGA mode.
Display
The Display menu allows you to modify the display settings, such as keystone and posi-
tion.
Display
On
Auto Keystone
Keystone
Projection
Select Exit Enter
Auto Keystone

: Select
On
to
automatically adjust image distortion caused by tilting
the projector.
Note: The Auto Keystone function can be only used to adjust the image distortion vertically.
Keystone

:
Adjust image distortion caused by tilting the projector (+/-40 degrees).
Note: If you adjust the keystone degree manually then the Auto Keystone function will be auto-
matically switched off.
Projection

:
Select the projection mode, depending upon how the projector is
mounted.
Auto Keystone
y
: On
No reverse
Left/ Right reverse
Auto Keystone
y
: Off
No reverse
Left/ Right reverse
Up/ Down reverse
Up/ Down and Left/ Right reverse