® S CU FO User Manual
Contents Safety Instructions...........................................................................................................3 Intended Use Statement......................................................................................................... 4 Safety Information................................................................................................................... 4 Safety Labels................................................................................................
OSD Reset................................................................................................................ 26 Data Transferring...................................................................................................... 26 Advanced................................................................................................................. 26 FW Version............................................................................................................... 26 Advanced Menu.
Safety Instructions The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Intended Use Statement yy Operation temperature: ---- For 0 - 2500 ft, 5 - 35 °C For 2500 - 5000 ft, 5 - 30 °C For 5000 - 10000 ft, 5 - 25 °C --- Operating: 5°C ~ 35°C, 80%RH (Max.), Non-condensing Storage: -20°C ~ 60°C, 80%RH (Max.), Non-condensing yy Maximum Humidity: The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the projector.
Warning To reduce the risk associated with hazardous voltage: yy Do not modify this product in any way. yy Do not attempt to service this projector. yy There are no user-serviceable parts. Service to be performed only by a Optoma authorized service provider using Optoma approved system components. yy Do not use the wall power supply in a wet environment. yy Do not use with a damaged wall power supply. Replace damaged part prior to use.
To reduce the risk associated with environmental contamination: yy Dispose of all system components in accordance with applicable government regulations. To reduce the risks associated with LED bright light: yy Do not stare directly into the projector lens. To reduce the risks associated with tripping and falling: yy Position the charging cord and data cables so that they are not a tripping hazard. IMPORTANT NOTE: Do not expose the projector to direct sunlight in a closed space such as a vehicle.
Trademarks Optoma and the Optoma logo are trademarks of Optoam Company. Adobe and the Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft, PowerPoint, and Excel are registered trademarks of Microsoft Corporation. microSD and microSDHC are trademarks of the SD Association. All other trademarks or registered trademarks are property of their respective companies.
Regulatory Notices FCC STATEMENT - CLASS B This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a residential installation.
CE Statement ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive Low Voltage Directive: Meets 2006-95-EC Directive. WEEE Statement The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Introduction Package Contents Your projector comes with all the items shown below. Ensure that you have all the items, and contact your local reseller or service center if anything is missing. FOCUS Projector Power cable AC adapter Universal 24-pin to VGA/Audio cable Quick start card and documentation Carrying case Remote control NOTE: The remote control is shipped with battery.
About Your Projector Main Unit FOCUS 1 2 FOCUS 3 4 5 # Description 1 Control panel 2 Focus ring 3 Lens 4 Input / Output connections 5 Tilt adjusting wheel 11 English
Input / Output Connections 1 6 5 4 # Description 1 MicroSD card slot 2 USB Type A connector 3 DC input connector 4 HDMI/MHL connector 5 Universal I/O connector 6 Security cable slot English 12 2 3
Control Panel 1 9 2 8 3 4 7 5 6 8 # Name Description 1 Power Turns the projector on or off. 2 Keystone adjustment Press to adjust image distortion caused by tilting the projector (+/-40 degrees). NOTE: This function is not supported on Multi-Media function. 3 Auto adjust Press to synchronize the projector to the input source. NOTE: Auto Adjust does not operate if the on-screen display (OSD) is displayed. 4 Error LED Error LED is solid amber, one of the LED has failed.
Remote Control # Name Description 1 Power Turns the projector on or off. 2 Source Press to enter Source menu and select an input source. 12 3 Menu Press to activate the OSD. 5 13 4 Enter Press to confirm the selection. 6 14 Play/Pause Press to play/pause media file. 5 Aspect Ratio Press to change aspect ratio of a displayed image. 6 Volume up Press to increase the volume. 7 Stop Press to stop playing media file. 8 Volume down Press to decrease the volume.
Installing the Remote Control Battery 25 LT C R 20 2. Insert a CR2025 coin cell battery and align the polarity correctly according to the marking in the battery holder. S 1. Remove the battery holder by holding down the side release firmly and pulling out the battery holder. S 25 LT C R 20 3V O NOTE: When you use the remote control for the first time, there is a plastic sheet between the battery and its contact. Remove the sheet before use. O 3V 3. Replace the battery holder.
Installation Connecting to a Computer 1 5 3 4 2 # Description 1 Power cord 2 AC adapter 3 Universal 24-pin to VGA/Audio cable 4 HDMI cable * 5 USB-A to USB-A cable * * NOTE: The accessory is not shipped with your projector.
Connecting to a DVD Player 1 3 2 # Description 1 Power cord 2 AC adapter 3 HDMI cable * * NOTE: The accessory is not shipped with your projector.
Connecting to Multi-Media 1 Smart Phone 4 5 3 2 # Description 1 Power cord 2 AC adapter 3 MicroSD card * 4 USB flash disk * 5 MHL cable * * NOTE: The accessory is not shipped with your projector.
Turning On/Off the Projector Turning Your Projector On NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power button light blinks amber until pressed. 1. Connect the power cord with AC adapter and appropriate signal cables to the projector. 2. Press the Power button. 3. Turn on your source (computer, DVD player, etc). 4. Connect your source to the projector using the appropriate cable. 5. The input source is determined by the last connected input source.
Adjusting the Projected Image Raising the Projector Height Raise the projector to the desired display angle, and use the front tilt adjustment wheel to fine-tune the display angle. Lowering the Projector Height Lower the projector, and use the front tilt adjustment wheel to fine-tune the display angle.
Adjusting Projection Image Size 80” (203.2 cm) 70” (177.8 cm) Projector to screen distance 60” (152.4 cm) 50” (127.0 cm) 40” (101.6 cm) 4.23’ (1.29 m) 5.28’ (1.61 m) 6.36’ (1.94 m) 7.41’ (2.26 m) 8.48’ (2.58 m) 30” (76.2 cm) 3.18’ (0.
Screen Size Diagonal Width Distance Height 30” (76.2 cm) 25.59” (65 cm) 15.75” (40 cm) 3.18’ (0.97 m) 40” (101.6 cm) 33.86” (86 cm) 21.26” (54 cm) 4.23’ (1.29 m) 50” (127.0 cm) 42.13” (107 cm) 26.38” (67 cm) 5.28’ (1.61 m) 60” (152.4 cm) 50.79” (129 cm) 31.89” (81 cm) 6.36’ (1.94 m) 70” (177.8 cm) 59.45” (151 cm) 37.01” (94 cm) 7.41’ (2.26 m) 80” (203.2 cm) 67.72” (172 cm) 42.52” (108 cm) 8.48’ (2.58 m) NOTE: This graph is for user reference only.
User Controls Using the On-Screen Display 1. The projector has a multi-language On-Screen Display (OSD) Menu that can be displayed with or without an input source. 2. Press the Menu button on the control panel or the remote control to enter the Main Menu. 3. To select an option, press the remote control. 4. Use the tings. or or buttons on your projector’s control panel or buttons on the control panel or remote control to adjust the set- 5.
Source The Source menu allows you to select your projector's input source. English VGA PC Mode Auto Adjust OSD Reset Data Transferring Advanced Auto Source If you select and press available input source. to activate, the Auto option will automatically find the next VGA Press to detect a VGA signal. HDMI Press English 24 to detect a HDMI signal.
USB Allows you to playback the photo, Audio, or Video files from your USB flash disk. Micro SD Allows you to playback the photo, Audio, or Video files from your microSD card. Internal Memory Allows you to playback the photo, Audio, or Video files from internal memory of the projector. Display Mode The Display Mode menu allows you to optimize the display image. The options are: Bright, PC, Cinema, and Photo mode.
Auto Adjust Auto Adjust automatically adjusts the projector's Horizontal Position, Vertical Position, Frequency, and Tracking in VGA source (PC mode). English VGA PC Mode Auto Adjust OSD Reset Data Transferring Advanced OSD Reset Select and press to reset all settings to its factory default. The below warning message appears: Resetting to factory default Reset items include both computer sources and Video source settings. Data Transferring Select and press to action.
Advanced Menu The Advanced menu allows you to change settings for Display, Image, and Power. English VGA PC Mode Auto Adjust OSD Reset Data Transferring Advanced Display (In PC Mode) Select and press ing options: to activate display settings. The display menu provides the follow- Advanced Display Horizontal Position Image Vertical Position Power Frequency Tracking Aspect Ratio Origin Zoom Horizontal Position Press to move the image right and to move the image left.
Aspect Ratio Allows you to select the aspect ratio to adjust how the image appears. Options are: Origin, 16:9 and 4:3. yy Origin: Select Origin to maintain the aspect ratio of the image projector according to the input source. yy 16:9: The input source scales to fit the width of the screen to project a 16:9 screen image. yy 4:3: The input source scales to fit the screen and projects a 4:3 image. Zoom Press or to zoom and view the image. NOTE: Closed caption option is available for NTSC only.
Image Select and press options: to activate image settings. The image menu provides the following Advanced Display Brightness Image Contrast Power White Intensity Brightness Press and to adjust the brightness of the image. and to adjust the display contrast. Contrast Press White Intensity Press and use and to display white intensity. NOTE: If you adjust the settings for Brightness, Contrast, and White Intensity the projector automatically switches to User mode.
Power Select and press options: to activate power settings. The power menu provides the following Advanced Display Power Saving 120 min Image Sleep Timer (min) 0 min Power Direct Power On Off Projection Front Speaker Off Display Hour hours Power Saving Select Off to disable Power Saving mode. By default, the projector is set to enter power saving mode after 120 minutes of no activity. A warning message appears on screen showing a 60 seconds countdown before switching to power saving mode.
Multi-Media Introduction Multi-media format supported: Photo Format Image Type (Ext Name) Sub Type Encode Type Max Size Jpeg / Jpg Baseline YUV420 4000x4000=16,000,000 pixel YUV422 YUV440 YUV444 Progressive YUV420 4000x4000=16,000,000 pixel YUV422 YUV440 YUV444 BMP 4000x4000=16,000,000 pixel Video Format File Format Video Format Decode Max res. Max Bit Rate (bps) Audio Format Profile MPG,MPEG MPEG1 1920x1080 30fps 30M bps MPEG1 L1-3 AVI, MOV, MP4, MKV H.
Music Type (Ext Name) Sample Rate (KHz) Bit Rate (Kbps) MP3 8-48 8-320 WMA 22-48 5-320 ADPCM-WAV 8-48 32-384 PCM-WAV 8-48 128-1536 AAC 8-48 8-256 Office Viewer Format File Format Support Version Page/Lines Limitation Size Limitation Adobe PDF PDF 1.0, 1.1, 1.2, 1.3, 1.4 Up to 1000 pages (One File) Up to 75MB MS Word British Word 95, Becasue office viewer does not load all pages of MS/Word file at the same time, there are not abvious limitations of page and line.
How to set-up File Type for Multi-Media with USB NOTE: 1. A USB flash disk must be plugged into the projector if you want to use the multimedia USB function. 2. Please don’t connect USB port for camera since it would be exist compatibility problem. FOCUS Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your projector: 1. Connect the power cable with AC adapter and turn on the projector by pressing the Power button. FOCUS 2. Plug in a USB flash disk to your projector. 3.
How to set-up File Type for Multi-Media with MicroSD NOTE: A microSD card must be plugged into the projector if you want to use the multimedia microSD function. FOCUS Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your projector: 1. Connect the power cable with AC adapter and turn on the projector by pressing the Power button. 2. Plug in a MicroSD card to your projector.
How to set-up File Type for Multi-Media with Internal Memory FOCUS Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your projector: 1. Connect the power cable with AC adapter and turn on the projector by pressing the Power button. 2. Access the Source menu, select the Internal Memory option and press the button. The image input source will automatically switch to Multimedia Menu when Internal Memory option is selected in this step.
Multi-Media Main Menu Photo Video Music Office Viewer Setup Multi-Media SETUP for USB, MicroSD, and Internal Memory The multi-media setup menu allows you to change settings for Photo, Video, Music, and Office Viewer. NOTE: Multi-media setup menu and set are the same for the USB, MicroSD, and Internal Memory.
Photo Setup Select and press following options: to activate photo setup menu. The photo setup menu provides the Setup Photo Setup Display Mode File List Video Setup Display Ratio Auto Music Setup Slideshow Duration 5 Sec. Information Slideshow Repeat On Slideshow Effect Random Display Mode Press or to select the display mode of the photo on the screen. Options are: File List, Thumbnail, and Slideshow. Display Ratio Press or (full screen).
Video Setup Select and press following options: to activate video setup menu. The video setup menu provides the Setup Photo Setup Display Ratio Auto Video Setup Play Mode Random Music Setup Auto Play Off Information Display Ratio Press or to select the display ratio of the Video. yy Auto: Keep original aspect ratio. yy Full: Full screen. Play Mode Press or to select the video play mode. Options are: Once, Repeat Once, Repeat, and Random.
Music Setup Select and press following options: to activate music setup menu. The music setup menu provides the Setup Photo Setup Play Mode Once Video Setup Show Spectrum Off Auto Play Off Music Setup Information Play Mode Press or to select the video play mode. Options are: Once, Repeat Once, Repeat, and Random. Show Spectrum Select On to show the spectrum plot while music is playing. Auto Play Select On to play the music automatically while entering the music list.
Information Display the current projector’s firmware version and date.
Appendices Troubleshooting If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact your local reseller or service center. Problem Possible Solution No image appears on the yy Ensure that the projector is turned on. screen yy Ensure that you have chosen the correct input source on the OSD Source menu. yy Ensure the external graphics port is enabled. If images are not displayed properly, please upgrade the video driver of your computer.
Problem Possible Solution The image is stretched when displaying a 16:9 DVD yy The projector automatically detects the input signal format. It will maintain the aspect ratio of the projected image according to input signal format with an Original setting. yy If the image is still stretched, adjust the aspect ratio in the Display settings of the Advanced menu in the OSD. LED warning indicator (LED) is solid amber yy A projector LED has failed and the projector will automatically shut down.
Guiding Signals TEMP Warning LED Warning (Amber) (Amber) OFF OFF OFF OFF Air vents might be blocked or ambient OFF temperature may be above 35 ºC. The projector automatically shuts down. Ensure that the air vents are not blocked and that the ambient temperature is within operational range. If the problem persists, contact us. Amber OFF One of the fans has failed. The projector automatically shuts down. If the problem persists, contact us. OFF Amber LED shutdown.
Compatibility Modes (Analog/Digital) Resolution Refresh Rate (Hz) Hsync Frequency (KHz) Pixel Clock (MHz) 640 x 350 70.087 31.469 25.175 720 x 400 70.087 31.469 28.322 720 x 400 70.087 31.469 28.322 640 x 480 59.940 31.469 25.175 640 x 480 75.000 37.500 31.500 640 x 480 85.008 43.269 36.000 800 x 600 60.317 37.879 40.000 800 x 600 75.000 46.875 49.500 800 x 600 85.061 53.674 56.250 1024 x 768 60.004 48.363 65.000 1024 x 768 75.029 60.023 78.750 1024 x 768 84.
Tripod Mount the Projector Screw a standard tripod into the screw hole on the projector. NOTE: 1. The tripod and ceiling mount are optional accessories. 2. Please note that damage resulting from incorrect installation will void the warranty. Unit: mm 54.0 52.0 S CU FO Insert Nut 1/4” - 20 UNCxL7.
