Operation Manual

© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com 5
2.2.5.
Computer (SVGA) Inputs VESA formats
Signal formats: DOS, VGA – WUXGA up to 165MHz pixel clock
RGB video level 0.7V - 1.0V
RGB input impedance 75 Ohms
Sync format Separate H & V sync at TTL/5V levels.
2.2.6.
HDMI & DVI Inputs
HDMI 1.3 with or without HDCP, 36-bit video compatible.
DVI-D input with or without HDCP
Signal formats -video
484i and 576i (SD) in double-rate formats (1440 pixels per line), 480p, 576p (ED), 720p, 1080i at 50,
59.94 & 60Hz, 1080p at 24, 25, 30, 50, 59.94 & 60Hz.
Signal formats – computer
DOS, VGA – WUXGA up to 165 MHz pixel clock
2.2.7.
Audio Output
HQView-5xx features an S/PDIF coaxial digital audio outputting HDMI audio.
2.2.8.
Display Output
Three output connectors are provided which are useable simultaneously, provided the input signal is
not HDCP encrypted. When the input signal has HDCP encryption, the DVI-D output connector will
carry a similarly HDCP encrypted signal and the VGA and 3G-SDI connector may be disabled. When
an HDCP encrypted signal is input, but the display device does not support HDCP, the output
image will turn black and a message indicating HDCP Signal will come up to indicate this.
One is a DVI-D output and the other is a VGA style output. Both conform to normal VESA standards
for connectors and pin outs for these signal types. The DVI-D connector will support HDMI 1.3 with
36-bit video and HD audio formats when connected to a suitable HDMI 1.3 receiver.
The 3G-SDI BNC output is supporting the same formats as accepted by the 3G-SDI input (see section
2.4.4.).