Operation Manual

© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com 27
Note: When changing from DHCP to Static mode or vice versa it is strongly recommended that
HQView-5xx is powered down after such a change, then powered back up, so that it is properly
recognised by other devices on the network.
3.11.7. Factory Defaults
This button let you restore all settings to the default values of the HQView-5xx, thus, provide a means
to get back to a known (good) system state. A requestor will come up and ask to confirm prior to actual
restore.
3.11.8. Operation Mode
This menu item is only available on a HQView-510/520/530. It allows to choose between the regular
multiple unit mode with blend and warp and a PiP mode. Selecting the PiP mode will effectively boot
the HQView-510/520/530 to emulate a HQView-500S. A HQView-500S has PiP/PaP/PoP capability but
no edge blend. In HQView-500S mode the Operation Mode can be switched back to Multiple Unit.