User Guide

English
47
USING THE PROJECTOR
Options lamp settings menu
OPTIONS
Lamp Settings
Lamp Hours
Lamp Reminder
Exit
Off
Lamp Mode
Lamp Reset
Bright
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Reminder
Off
On
Lamp Mode
Set the lamp mode setting.
Bright:  Increase the brightness.
Eco.:  Dim the projector lamp which will lower power consumption and extend the lamp life.
Dynamic: Dim the lamp power which will be based on brightness level of the content and adjust lamp 
power consumption between 100% and 30% dynamically. The lamp life will be extended.
Lamp Mode
Bright
Lamp Reset
Resets the lamp hour counter after replacing the lamp.
No
Yes
Lamp Reset
Exit
Choose "Exit" to exit the menu.
Note:
When ambient temperature is over  40°C during operation, the projector will switch to Eco
automatically.
The “Lamp Mode” can be independently set for 2D and 3D. 