User’ Guide Handleiding Guide de l’utilisateur Bedienungsanleitung Guía del usuario
CONTENTS Package Contents -------------------------------------------------------------------------------------------------- GB-1 Important Safety Instructions ------------------------------------------------------------------------------- GB2-3 Your Projector -------------------------------------------------------------------------------------------------------- GB-4 About Your Projector -------------------------------------------------------------------------------------------------- GB-4 Connecting Your
IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT ELECTRIC SHOCK, IF THE UNIT IS PROVIDED WITH A POLARIZED PLUG, DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLETS UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PART OF THE BLADES EXPOSED. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF PLUG TO THE WIDE SLOT, AND FULLY INSERT THE PLUG.
IMPORTANT SAFETY INSTRUCTIONS INFORMATION TO USER FCC statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes and modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
YOUR PROJECTOR About Your Projector 4 1. 2. 3. 4. Control panel Focus Ring Lens Adjustable foot CAUTION: Safety Instructions 1. Do not use the projector near appliances that generate a lot of heat. 2. Do not use the projector in areas where there is an excessive amount of dust. The dust may cause the system to fail and the projector will automatically shutdown. 3. Ensure that the projector is placed in a well-ventilated area. 4. Do not block the ventilation slots and openings on the projector. 5.
CONNECTING YOUR PROJECTOR Connecting a Computer Connecting a Computer using a VGA Cable 1. VGA Cable 2. AC Adapter Connecting a DVD Player Connecting a DVD Player using a Composite Video Cable 1. AC Adapter 2.
USING YOUR PROJECTOR Turning Your Projector ON NOTE : Turn ON the projector before you turn ON the image source. 1. Connect the Composite Video Cable, or VGA Cable into the projector. 2. Connect Composite Video Cable, or VGA Cable to the image sources. 3. Press the POWER ON/OFF Button (see "Using Your Projector" on page 8 to locate the POWER ON/OFF Button). 4. Turn ON your image source (computer, DVD player, etc.). 5.
USING YOUR PROJECTOR Adjusting Projection Image Size Adjusting the Angle The one front foot is adjustable by pressing and releasing the side key (1), the foot (2) in order to tilt the projected image up or down.
USING YOUR PROJECTOR Using the Control Panel 1. POWER ON/OFF - Turn the projector on and off. For more information, see “Turning Your Projector On” and “Turning Your Projector Off” on page 6. 2. SOURCE - Press to toggle through PC input (VGA) and composite sources. 3. MENU - Press to activate the On Screen Display (OSD). 4. 5. , - Press to select OSD items when the OSD Menu is active after activate OSD. , - Press to adjust the OSD setting under the displayed OSD menu when the OSD Menu is active.
USING YOUR PROJECTOR Menu operation Press MENU Button to see the top level menu. Use and Buttons to select Image Preference, Image Size, Image Orientation, Input Source, or Language Menu. Image Preferences Menu Use and Buttons to select Bright Mode, Standard Mode, Video Mode. BRIGHT - Select when viewing images in a well lit room. STANDARD - Select when connected to XBOX 360 / PS2 / PS3 / Wii or when viewing images from a computer.
USING YOUR PROJECTOR Input Source Menu Use and Buttons to select Composite Video or PC (VGA) Input. (Factory default is composite video) Composite Video On Screen Display(OSD) After composite video source is connected, “Composite Video OSD” may continue to display for few seconds, until source detection is finished, and composite video image appears on the screen.
USING YOUR PROJECTOR Language menu Use VOL+ and VOL- buttons to select language, English, Francais, Deutsche, Nederlands, Español. Audio Use or Buttons to change the volume from the speaker, and Volume bar icons will be displayed for a short time when this is done. If the volume is reduced to minimum then Mute icon will be displayed for a short time. Reset to Factory Default Settings and Buttons pressed simultaneously will set the projector settings to factory defaults.
TROUBLESHOOTING YOUR PROJECTOR If you experience problems with your projector, see the following troubleshooting tips. Problem-Possible Solution No image appears on the screen Ensure that the external graphics port is enabled if you are using a portable computer. Ensure that all the cables are securely connected. See on page 5. Ensure that the pins of the connectors are not bent or broken.
Optoma Technology, Inc. 3178 Laurelview Court Fremont CA 94538 U.S.A. Phone: (1) (888) 289 6786 Optoma Europe Ltd 42 Caxton Way, Watford Business Park Watford, Herts WD18 8QZ U.K.
