Operation Manual
English
44
User Controls
SETUP |
Security
Security Timer
On: Choose “On” to use security verication when turning on
projector.
Off: Choose “Off” to be able to switch on the projector without
password verication.
Change Password
First time:
Press “ ” to set the password.
The password has to be 4 digits.
Use number button on the remote to enter your new pass-
word and then press “ ” key to conrm your password.
Change Password:
Press “ ” to input old password.
Use number button to enter current password and then
press “ ” to conrm.
Enter new password (4 digits in length) using the number
buttons on the remote, then press “ ” to conrm.
Enter new password again and press “ ” to conrm.
If the incorrect password is entered 3 times, the projector will
automatically shut down.
If you have forgotten your password, please contact your local
ofce for support.
Security
On: Choose “On” to use security verication when turning on
projector.
Off: Choose “Off” to be able to switch on the projector without
password verication.
1.
2.
3.
1.
2.
3.
4.
NOTE
Password default
value is “1234”
(rst time).
Always keep
the password
in your les. If
the password is
forgotten or lost,
the projector will
have to be sent
to your local au-
thorized service
center.