Operation Manual

English
23
User Controls
Using the Remote Control
Power On Turn on the projector.
Standby Turn off the projector.
Function 1 Adjust Function 1 settings.
Function 2 Adjust Function 2 settings.
Lens Focus Adjust lens focus function.
Lens Zoom Adjust lens zoom function.
Lens Shift Adjust Lens shift up/down/left/right.
LED Indicator Indicate Lens function status. LED
indicator light that is in use.
Source Press “SOURCE” to select an input
signal.
Volume +/- Adjust to increase / decrease the
volume.
Shutter Open/close the built-in shutter.
Keystone Adjust image distortion caused by
tilting the projector.
Display Mode Select the display mode from
Presentation, Bright, Movie, sRGB,
Blackboard, Classroom, DICOM
SIM., 3D, ISF Day, ISF Night and
User.
HDMI Press “HDMI” to choose source
from HDMI connector.
DVI Press “DVI” to choose source from
DVI-D connector.
Re-Sync Automatically synchronize the pro-
jector to the input source.
Info. (Information) Display the projector’s information.
Numbered Keypad Press “1~9” to input a password in
the “Security” settings.
YPbPr Press “YPbPr” to choose compo-
nent video source.
Remote Control