Operation Manual

41
English
User Controls
Setup | Security
■ First Time:
1.ThePasswordis4digits,DEFAULTVALUEis“1234”.(rsttime)
2. Use number buttons on the remote to select your password, and then
press
“Enter”keytoconrmyourselection.
Change Password
1. Press “Enter” to input old password.
2. Use number button to enter current password, and then
press “Enter” key again to reveal next OSD menu.
3
. Scroll down to highlight Password, and then press
“Enter” to activate.
4
. Enter new password (4 digits in length) using the
number buttons on the remote, then press “Enter” to
conrm.
5
. Enter new password again and press “Enter” to conrm.