Operation Manual

English

Installation

Powering On the Projector

1. Remove the lens cap. 

2. Ensure that the power cord and signal cable are securely

connected.  The Power LED will be Red.

3. Turn on the lamp by pressing “

” button either on the top

of the projector or on the remote. The Power LED will ash

Blue.

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you can select your

preferred language from quick menu after the startup screen

display.

Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically.

If you connect multiple sources at the same time, press the

“Source” button on the control panel to switch between

inputs.

Powering On/Off the Projector

Turn on the

projector rst and

then select the

signal sources.

Lens Cap

Power/Standby

Power LED