User's Manual

English

USING THE PROJECTOR

 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an

image.

± Reset: Return the factory default settings for RGB gain/bias.

± Exit: Exit the “RGB Gain/Bias” menu.

 Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: Auto,

RGB, or YUV.

 Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,

RGB(0-255), RGB(16-235), and YUV.

Signal

Adjust the signal options.

 Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If

automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.

 Frequency: Change the display data frequency to match the frequency of your computer’s graphic

card. Use this function only if the image appears to icker vertically.

 Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be

unstable or ickers, use this function to correct it.

 H. Position: Adjust the horizontal positioning of the image.

 V. Position: Adjust the vertical positioning of the image.

Note: This menu is only available if the input source is RGB/Component.

Brightness Mode

Adjust the brightness mode settings.

 DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast

performance.

 Eco.: Choose “Eco.” to dim the projector laser diode which will lower power consumption and extend

the laser diode life.

 Power: Choose the power percentage for brightness mode.

Reset

Return the factory default settings for color settings.