User's Manual

English
34
USING THE PROJECTOR
 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
 Color Space (HDMI input): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Dynamic Black
Use to automatically adjust the picture brightness to give optimum contrast performance.
Brightness Mode
Adjust the brightness mode settings for lamp-based projectors.
 Bright: Choose “Bright” to increase the brightness.
 Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
Reset
Return the factory default settings for color settings.
Display enhanced gaming menu
Enhanced Gaming
Enable this feature to reduce response times (input latency) during gaming to 16ms.
Note: This function only works for 1080P@60Hz/1080P@120Hz signals.
Display 3D menu
3D Mode
Use this option to disable or enable the 3D function.
 Off: Select “Off” to turn off 3D mode.
 On: Select “On” to turn on 3D mode.
3D Tech
Use this option to select 3D technology.
 DLP-Link: Select to use optimized settings for DLP 3D Glasses.
 3D Sync: Select to use optimized settings for IR, RF or polarized 3D Glasses.
3D → 2D
Use this option to specify how the 3D content should appear on the screen.
 3D: Display 3D signal.
 L (Left): Display the left frame of 3D content.
 R (Right): Display the right frame of 3D content.