Use Instructions

Instructions For Use
Page 22 / 47
IFU-3M001-EN-00 (2021.03.05)
LOAA(Lab on An Array) Real-Time PCR Instrument
Table 2. Fuction icons in Record Screen
Function icon
Description
Export report in PDF format
Delete test result
Sort test results by date and product name
Search for product name
5.4. Test Procedure
5.4.1. Enter sample ID
Figure 13. Enter Sample ID Screen
Enter sample ID HOME>New Test
1) When touch New test, sample ID entering menu will appear.
2) On the screen, there are 5 input boxes where user can enter ID’s of samples.
3) Maximum number of sample ID’s user can enter is 5 and user can proceed to the next step without entering any
sample ID by touching next button.
4) Default sample ID entering method is by using QR scanner built in the device. QR scanner will be automatically
turned on for about 10 seconds and waiting for user to scan sample ID one by one. When one sample ID is scanned
successfully, QR scanner will be turned off and then turned on again after a few seconds. Then user can scan next
sample ID while QR scanner is turned on. This process will repeat until maximum 5 sample ID’s are scanned.
5) User can also enter sample ID manually by touching empty input box while QR scanner is turned on and off
repeatedly.
6) Sample ID entering operation will finish in the following 2 cases: one is when all 5 sample ID’s are scanned and in
this case, device will proceed to next scene automatically. The other is when user touches the next button.
7) User can modify entered sample ID by touching corresponding input box.
8) All sample ID’s entered should be unique. Any 2 sample ID’s can not be the same and when trying to enter already
existing sample ID, this will be discarded.