Use Instructions

Instructions For Use
Page 14 / 47
IFU-3M001-EN-00 (2021.03.05)
LOAA(Lab on An Array) Real-Time PCR Instrument
2.5. Installation of LOAA Analyzer System
1) Unpack the equipment and place it on a solid, flat surface.
2) Connect the equipment power adapter to the DC connector on the back of the equipment (dashed rectangle).
3) Turn on the main power switch at the bottom of the equipment rear panel.
4) Start the LOAA Analyzer by pressing the power button on the front center for about 4 seconds.
5) Set up the initial environment settings such as language, network configuration, date/time, brightness, volume,
administrator password, user password, and general information. You need to set it up once at the beginning.
※ Initial environment settings can be reconfigured later in the setting menu. (See Section 5.6)
6) When the LOAA Analyzer is powered on, the login screen (Figure 4) is displayed and you can go to the main
screen after entering correct user password (Figure 5, Figure 6). User password has been set in initial configuration
step.
Figure 4. Login screen of LOAA Analyzer (Network connection OFF)
※ For how set a password, refer to Section 5.6.
※ For network setting method, refer to Section 5.6.