User Manual

OPR-3301 SS08xxx
5
5.3. Charging Current
Status Specification Remark
600 mA or less
When connected to RSS232C (using a AC
adapter).
Charging with CRD-3301
300 mA or less
When connected to USB.
Bus power class: Hi-PO WER（500 mA）。
Nom500 mA。
Measurement condition /
others
・Measured at 25°C.
・Temperature should be between 0 to 40°C when charging scanner.
(Charging may be stopped when the temperature is over 40°C due to the thermo
protection.)
・As a protection for when there is a malfunction of power supply, charging will be
stopped when the voltage impressed to the charging terminals is over the range
between 3 to 6V.
5.4. Operation Time and Charging Time
Status Specification Remark
Idle 1 About 55 hours - When Bluetooth is disconnected all the time.
Idle 2 About 48 hours - When Bluetooth is connected all the time.
Battery up time
When scanning About 15 hours
- When scanning once in every 5 seconds.
- When Bluetooth is disconnected all the time.
Charging time 1
About 5 hours - When the scanner is connected to CRD-3301
via RS232C.
Charging time
Charging time 2
About 10 hours - When the scanner is connected to CRD-3301
via USB (power supplied from n).
*OPR-3301 may not satisfy the foregoing performance due to battery degradation.