User Manual

OPR-3301 SS08xxx
10
9. Default Setting
Scan the following menu barcodes to return to the default settings.
Default Settings 1: Options Readable codes
Symbology Read
Transmit
Code
Length
Transmit
CD
Calculate
CD
Set
Prefix
Set
Suffix
Other
UPC-A ○ × ○ ○
－
CR
UPC-A Add-on × × ○ ○
－
CR
UPC-E ○ × ○ ○
－
CR
UPC-E Add-on × × ○ ○
－
CR
EAN-13 ○ × ○ ○
－
CR
EAN-13 Add-on × × ○ ○
－
CR
EAN-8 ○ × ○ ○
－
CR
EAN-8 Add-on × × ○ ○
－
CR
Code 39 ○ × ○ ×
－
CR Not transmit ST/SP
Code 39 Trioptic ○ ×
－ － －
CR Not transmit ST/SP
NW-7(Codabar) ○ × ○ ×
－
CR Not transmit ST/SP
Industrial2of5 ○ × ○ ×
－
CR
Interleaved2of5 ○ × ○ ×
－
CR
Code 93 ○ × × ○
－
CR
Code 128 ○ × × ○
－
CR
EAN-128 × × × ○
－
CR
S-Code ○ × ○ ×
－
CR
MSI/Plessey ○ × ○CD1 ○CD1
－
CR
UK/Plessey ○ × ○ ○
－
CR
TELEPEN ○ × × ○
－
CR
Matrix2of5 × × ○ ×
－
CR
Chinese Post Matrix 2of5 × × ○ ×
－
CR
IATA ○ × ○ ×
－
CR
RSS-14 × × ○ ○
－
CR
RSS-limited × × ○ ○
－
CR
RSS-expanded × × ○ ○
－
CR
PDF417 × ×
－ － －
CR
MicroPDF417 × ×
－ － －
CR
Code 11 × × × ○
－
CR
Korean Postal Code
(Code 3of5)
× × × ○
－
CR
1. In the “Reading” column, “” means “Enable reading” and “X” means “Disable reading.”
2. In the “Transmit code length” column, “” means “Transmit code length” and “X” means “Do not transmit code length.”
3. In the “Transmit CD” column, “” means “Transmit check digit” and “X” means “Do not transmit check digit.”
4. In the “Calculate CD” column, “” means “Calculate check digit” and “X” means “Do not calculate check digit.”
“— “ means “not supported.”
5. In the “Prefix” column, “—“ means “there is no prefix setting.”