SPECIFIICATIONS MANUAL M OPN-21002nn OP OPN-2102n 1st Data D Colle ector with h Bluetootth This ma anual provides speciffications fo or the OPN N-2102n Bl uetooth data collector c w with laser ba arcode sca anner.
SPECIFICATIONS MANUAL OPN-2102n 1st The information in this document is subject to change without notice. Document History Model Number: Edition: Date: OPN-2102n 1st 30-September-2016 Specification Number: Original Spec Number: SS16058 (SS16047) © 2016 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
SPECIFICATIONS MANUAL OPN-2102n 1st Revision History Product Name : OPN-2102n Edition st 1 Date 2016/09 /30 Page - Section Description of Changes - 3
SPECIFICATIONS MANUAL OPN-2102n 1st Contents 1 Abstract............................................................................................................................ 6 2 Overview .......................................................................................................................... 6 3 Basic Specifications ....................................................................................................... 7 4 Detailed View ........................................
SPECIFICATIONS MANUAL OPN-2102n 1st 11 RoHS .............................................................................................................................. 20 12 Reliability ....................................................................................................................... 20 13 Precautions.................................................................................................................... 20 13.1 Precaution against Laser Light ...........................
SPECIFICATIONS MANUAL OPN-2102n 1st 1 Abstract This manual provides specifications for the OPN-2102n compact laser data collector with built-in Bluetooth. 2 Overview The OPN-2102n is compact battery powered portable laser scanner with a build-in wireless battery charger. Below are some of the key features: • The OPN-2102n is a handy and simple to use data collector. • The scanned barcode data can be transmitted to a host device through the USB interface or via the build-in Bluetooth interface.
SPECIFICATIONS MANUAL OPN-2102n 1st 3 Basic Specifications Item Specification Control Section Input Section Indicator RTC CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte Key type 2 key: trigger, function LED 2 bi-colors LEDs (red, green) and 1 blueLED Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable Contents Year, month, date, hour, minute, second Accuracy ± 90 seconds per month Interface B
SPECIFICATIONS MANUAL Item Specification Power Section Minimum PCS 0.3 or more Main battery Lithium-polymer 600 mAh (typ.) Up-time 25 hours or more Feeding system Electromagnetic guidance wireless charging, microUSB Operating (charging) voltage 4.5 ~ 5.
SPECIFICATIONS MANUAL OPN-2102n 1st 4 Detailed View 1 3 5 8 9 4 6 7 2 Figure 1: Detailed View No Name 1 Scan Window Description The laser light is emitted through this window. Ensure that the lens is not exposed to dust and dirt before scanning. 2 USB Cap Cap for USB connector part used to make the scanner IP54 water tight. 3 Trigger Key Press this key to enable the laser and start reading barcodes. 4 Function Key The function of this key depends on the installed application.
SPECIFIICATIONS MANUAL M OPN-2102n 1st 5 Ele ectrical Specifica S ations 5.1 U USB Su upply Voltage Bu us-power (Cllass) Cu urrent consu umption 5.2 : 4.5-5.5V V : 500mA m max (hi-powe er) : Less tha an 500mA W Wireless Charging Fe eeding system Po ower consum mption : Electrom magnetic indu uction : Less tha an 5W 6 Intterface Specifica S ations The OPN N-2102n sup pports two typ pes of interfa aces; USB an nd Bluetooth h. 6.1 U USB Interfa ace Interface is Fu ull Speed USB interface. 6.1.
SPECIFICATIONS MANUAL 6.2 OPN-2102n 1st Bluetooth The specifications of the OPN-2102n Bluetooth interface are as follows: Frequency : 2402 ~ 2480 MHz 6.3 Specification : Bluetooth Ver 2.
SPECIFICATIONS MANUAL 7.2 7.2.1 OPN-2102n 1st Laser Scanning Standards Laser Scanning Tilt Vertical differences between both ends of a laser scanning line: - Up to 1.2 degrees in a vertical direction from the scan origin (scanning mirror). - Up to 3.1 mm measured at 150 mm from the scan origin and with zero skew angle. - Measure in the middle of the scanning line. 7.2.
SPECIFICATIONS MANUAL OPN-2102n 1st 8 Technical Specifications Ambient conditions are as follows unless otherwise specified in each section: Ambient Temperature and Humidity Room temperature, room humidity Ambient Light 500 ~ 900 lx Barcodes Refer to Section 8.1. Background Power supply voltage Black 5V (USB) Accept the performance with 10 consecutive successes in reading. Each reading should be done in 0.5 seconds or less. Reading Test 8.
SPECIFICATIONS MANUAL Scan Area and Depth of Field The scanner is able to read in the area between the two arcs that are centered on the scan origin with a center line distance from the front of the scanner as indicated for each resolution. Resolution No. of Digits Depth of Field (mm) 1.0mm 1 50 ~ 420 0.5mm 3 45 ~ 340 0.25mm 8 40 ~ 250 0.15mm 10 40 ~ 155 0.127mm 4 45 ~ 130 Barcode Angle : Code 39 specified in Section 8.1.
SPECIFICATIONS MANUAL 8.3 OPN-2102n 1st Printed Contrast Signal (PCS) PSC 0.3 or higher (70% or higher reflectivity of space and quiet zone) PCS = Reflectance of white space – Reflectance of black bar Reflectance of white space Note: Be sure to keep the optical window clean without dirt or scratches, or it may have a detrimental effect on the reading characteristics. 8.4 Minimum Resolution Minimum Resolution 0.076mm Barcode Distance Angle 8.5 Code 39 specified in Section 8.
SPECIFICATIONS MANUAL 8.6 OPN-2102n 1st Curvature 8-digit JAN: 13-digit JAN: Barcode Distance Angle R ≧ 15 mm R ≧ 20 mm Resolution 0.26 mm, JAN specified in Section 8.1. 100 mm from the edge of the scan engine Skew angle β = +15° バーコード Bar code R Figure 7: Curvature Note: The reading performance may deteriorate if there is specular reflection of the laser light, this typically will occur when the reflectivity of the barcode is high. 9 Environmental Specifications 9.
SPECIFICATIONS MANUAL 9.3 OPN-2102n 1st Ambient Light Immunity Scanning performance is guaranteed when the illumination on a barcode surface is between zero and the following values: Incandescent light: Fluorescent light: Sunlight: Barcode: Distance: Angle: Curvature: Power-supply voltage: 4,000 lx 4,000 lx (excluding high-frequency lighting) 80,000 lx Optoelectronics Test Sample Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1 : 2.
SPECIFICATIONS MANUAL 9.7 OPN-2102n 1st Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm onto a concrete floor as shown below. 150cm Figure 8: Drop Test 9.8 Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test.
SPECIFICATIONS MANUAL OPN-2102n 1st 10 Regulatory Compliance 10.1 LED Safety JIS C 6802：2011 Class 2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ 10.2 Product Safety EN60950-1:2005 IEC60950-1:2006 10.3 EMC R & TTE Directive ・EN 55024:2010 ・EN 55032:2012+AC: 2013 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.2.1 ・EN 300 328 V1.9.1 ・EN 302 291-2 V1.1.
SPECIFICATIONS MANUAL OPN-2102n 1st VCCI Class B This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. 10.
SPECIFICATIONS MANUAL OPN-2102n 1st 13.2 Handling Handle this product carefully. Do not deliberately subject it to any of the following. (1) Shock: ・ Do not drop this product from a height greater than specified in this manual. ・ Do not place this product under or between any heavy items. ・ Do not swing the cable around. (2) Temperature Conditions: ・ Do not use this product at temperatures outside the specified range. ・ Do not pour boiling water on this product. ・ Do not throw this product into a fire.
SPECIFICATIONS MANUAL OPN-2102n 1st 13.4 Bluetooth ・This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile ・This product complies with Bluetooth standards; however, its communication performance with untested devices is not guaranteed. ・Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices. It may affect the communication speed and distance between this product and the host device.
SPECIFICATIONS MANUAL OPN-2102n 1st 14 Product Labels The product labels are affixed to the scanner as shown below.
SPECIFIICATIONS MANUAL M OPN-2102n 1st 15 Pa ackaging g Specific cations 15.1 In ndividual Packaging P g Asssembled pa ackage size: Approx. 125 5 × 112 × 40 (WDH mm) W Weight: Appro ox. 140g OPN-2012n Place intto the box with h folded side do own without ta aped. *Place with w Opticon lo ogo upward. Display for the Serial--No. 『 『123456』 123456=Producct serial numbe er. Displayy 6-digets serial number. Place the MiicroUSB cable e with conne ector far side. Place with h taped side backk ward.
SPECIFIICATIONS MANUAL M OPN-2102n 1st 15.2 C Collective Packaging P g 10 00pcs per bo ox Asssembled pa ackage size W Weight: Appro ox. 15kg : Approx. 5 595 × 520 × 245 2 (WDH mm) m Thhe order of serial-No. Packing box: 5B0008 (100pcs perr box) Enter battery tyype 「Lithium ion b battery」and phon ne number 「01-24 422-31-31」. And place 1pc next to o either side of the packing box label.
SPECIFICATIONS MANUAL OPN-2102n 1st 16 Physical Features 16.1 Dimensions 83.0 × 36.0 × 21.5 (DWH mm) 16.2 Weight Approx. 60 g (excluding accessories) 16.
SPECIFICATIONS MANUAL OPN-2102n 1st 17 Supported Symbologies 17.1 Default Setting The scanner is set to default by reading the following menu label. Recorded contents of the NFC tag will also return to default. Function Menu label Menu code _ZZ_ _SO_ _ZZ_ SET Default END ZZ SO ZZ 17.2 Supported Symbologies 17.2.
SPECIFICATIONS MANUAL OPN-2102n 1st 17.2.
