User Manual

OPL-2724 SS08057
- -
11
9. Operation Specifications
9-1. Buzzer and LED Display
OPL-2724 notifies its operation state with LED and buzzer on its head section.
Overview
Status Color Light Details of the Status Buzzer
Green Lighting
Shows that scanning of the barcode or transmission of scanned
has been done successfully.
Trrr
Orange Lighting
Shows that scanned data is stored in memory while the scanner
is disconnected.
Trrrrrrrrrrr
Scanning
Red Lighting Shows that the scanned data was not successfully transmitted.
Pip, Pip, Pip
Blue Blinking Shows that the scanner is making connection to Bluetooth. ---
Blue Blinking Shows that Bluetooth connection was made successfully. (*1)
Trrr, Trrr
Bluetooth
connect
Red Lighting Shows that Bluetooth connection was not made successfully.
－
Red Lighting Shows that Bluetooth was disconnected.
Pip, Pip, Pip
Bluetooth
disconnect
Red Lighting Shows that the Bluetooth device is out of range or not available.
Trrrrrrrrrrr
Red Lighting
Notifies that the batteries are running low every time the user
presses trigger key. (*2)
It is possible to scan barcodes.
Pip, Pip, Pip
Trigger Key
operation
Red Lighting
Notifies that the batteries are running low every time the user
presses trigger key. (*3)
It is not possible to scan barcodes.
---
*1: When the scanner is automatically connected after scanning a barcode, Good Read buzzer will
sound.
*2: Please prepare new batteries.
*3: Please change batteries.
9-2. Operating Time
Specifications Conditions
About 48 hours
- When scanning once in every 5 seconds.
- When Bluetooth is connected all time.
30 days or longer
- When scanning 100 times a day.
- Connect Bluetooth only when transmitting scanned data.
Operating conditions
- Normal temperature
- Barcode sample: Code-39 (PCS: 0.9, Resolution: 0.25mm)
*The foregoing performance is guaranteed when using alkali batteries.
*OPL-2724 may not satisfy the foregoing performance due to battery degradation.