User Manual

OPL-2724 SS08057
- -
10
8. Interface Specifications
8-1. Wireless Specifications
OPL-2724 is a Bluetooth ver2.0 + EDR compliant device supporting SPP (serial port profile).
OPL-2724 uses Bluetooth as the wireless interface.
Therefore, the device which communicates with the OPL-2724 must support the same SPP.
Supported protocol stack
RF (Radio Frequency Protocol)
BB (Base Band Protocol)
LM (Link Manager Protocol)
L2CAP (Logical Link Control and Adaptation Protocol)
SDP (Service Discovery Protocol)
RFCOMM (serial port emulation)
-Supported profile
GAP (Generic Access Profile)
SPP (Serial Port Profile)
-Communication configuration
1 OPL-2724 to 1 Host System (Do not connect multiple scanners to one host system.)
-Operation mode of the scanner while connected to the host system
Master / Slave mode
-Security mode
Authentication enabled: These settings can be configured using menu barcodes.
-Encryption
Encryption enabled: These settings can be configured using menu barcodes.
*Encryption will be disabled if the device which communicates with the OPL-2724 does not support
the encryption features.
-Communication range
Approximately 10 meters
*Communication range may differ due to the environments.
8-2. Configuration of Settings by Reading Menu Barcode Labels
Communication parameter settings of OPL-2724 can be configured by scanning menu barcodes.
(Refer to the instruction manual for further information of menu barcodes)