Master Specification Wireless Barcode Scanner Product Name OPL-2724 Specification No. SS08057 Edition Initial Date of Publication Original Spec. No. SS08045 Optoelectronics Co., Ltd.
Revision History Specification Number: SS08057 Product Name: OPL-2724 Revision Date Section Initial 2008/ - Description of Changes
OPL-2724 SS08057 Table of Contents 1. Abstract.................................................................................................................................................. 1 2. Overview................................................................................................................................................ 1 3. Physical Features .................................................................................................................................. 1 4.
OPL-2724 SS08057 1. Abstract This manual provides specifications for the OPL-2724 wireless barcode scanner. This scanner is a laser barcode scanner which is able to detect black or colored barcodes on the white or colored back ground. 2. Overview - OPL-2724 is a wireless barcode scanner. The use of a short-wavelength red laser beam enhances visibility when scanning lines. To scan a barcode, press the trigger switch without the optical window of this scanner touching the objective barcode.
OPL-2724 SS08057 4. Detailed View Figure 2: Detailed View Name 1. Trigger Switch 2. 3-color LED (Red, Green, Blue) 3. Plastic Mask for Optical Window 4. Laser Scan Engine 5. Battery Cover 6. Certification Label 7. Laser Caution Label 8. Serial Label 9. Serial Barcode Label 10. Hand Strap Hole Function To scan barcodes and to enable or disable Bluetooth communication. To notify the status of barcode scanning, Bluetooth communication, and warnings so on. Optical window for laser barcode scanning.
OPL-2724 SS08057 5. Basic Specifications Item Control section External memory Display section CPU Clock frequency FROM SRAM LED Function Buzzer Loudness Operation keys Operation keys Specifications 16-bit CISC CPU 14.74 M Hz 256 KB 32 KB 3-color LED (red, green, blue) Notifies the status of barcode scanning, battery power remained, Bluetooth communication.
OPL-2724 SS08057 6. Electrical Specifications Item Light source Emission wavelength Light output Scan method Scan rate Scan angle Scan angle Resolution Specifications Red laser diode 650 ± 10 (at 25 deg. C）JIS C 6802 Class 1 < 1.0 (IEC60825-1 Class 2) Bi-directional scanning 100 ± 20 54 ± 5 44° 0.127 or higher Unit － nm mW － scans / sec Deg. Deg. mm 7. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section.
OPL-2724 SS08057 7-1. Scan Area and Resolution Figure 3: Depth of field in millimeters. PCS 0.9 Resolution (mm) 1.0 0.5 0.25 0.15 Space 25 mm 18 mm 10 mm 7 mm Depth of Field (mm) 70 to 185 50 to 160 50 to 120 50 to 70 Details: The depth of field is measured from the optical window of the scanner. The scan area is a circular area centered on the beam, which appears at various resolutions. Conditions: Resolution 1.0 mm 0.5 mm 0.25 mm 0.
OPL-2724 SS08057 7-2. Pitch Angle Pitch angle: α = ± 25° Figure 4: Pitch angle 7-3.
OPL-2724 SS08057 7-4. Dead Zone Dead zone: β = ± 8° (There are some areas in which scanning may fail due to specular reflection.
OPL-2724 SS08057 7-5. Tilt Angle γ = ± 20° Barcode Sample: OPTOELECTRONICS test sample PCS: 0.9 Resolution: 0.26 mm Symbologies: 13-digit JAN (96 mm from the optical window of the scanner.) Figure 6: Tilt angle 7-6. Curvature With 8-digit JAN barcodes, decoding performance is guaranteed when R≧15mm. With 13-digit JAN barcodes, decoding performance is guaranteed when R≧20mm. (96 mm from the optical window of the scanner.
OPL-2724 SS08057 7-7. Scan Width Scannable barcode width differs depending on the depth of field. 7-8. Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent Light: to 3,000 lx. Fluorescent Light: to 3,000 lx. Sunlight: to 50,000 lx Figure 8: Ambient Light Immunity In the state shown in the figure above, carried out scanning test under the conditions below: PCS: 0.9 Resolution: 0.
OPL-2724 SS08057 8. Interface Specifications 8-1. Wireless Specifications OPL-2724 is a Bluetooth ver2.0 + EDR compliant device supporting SPP (serial port profile). OPL-2724 uses Bluetooth as the wireless interface. Therefore, the device which communicates with the OPL-2724 must support the same SPP.
OPL-2724 SS08057 9. Operation Specifications 9-1. Buzzer and LED Display OPL-2724 notifies its operation state with LED and buzzer on its head section. Overview Status Scanning Color Light Green Lighting Orange Lighting Details of the Status Shows that scanning of the barcode or transmission of scanned has been done successfully. Shows that scanned data is stored in memory while the scanner is disconnected.
OPL-2724 SS08057 10. Default Settings To make it easier to configure the settings of OPL-2724 to the default settings, there are [U1] menu barcodes. For communication settings, there are [INIT] menu barcodes. At the time of shipment from the factory, all settings are configured to [U1]. ([INIT] menu barcodes are included in [U1] menu barcodes.
OPL-2724 SS08057 [U1] Default Settings 2: Read, trigger and buzzer options Item Default setting Setting the number of characters Fixed length OFF all codes Read mode Single read Multiple read reset time 500 msec Add-on wait mode 500 msec Redundancy Read 3 time, redundancy = 2 NW-7 inter-character gap check Within 1 character Multiple columns read Disable multiple columns read Trigger switch Enable trigger 2 seconds Read time Buzzer durations 200 msec Buzzer tone 3 kHz + 2.
OPL-2724 SS08057 11. Durability 11-1. Water Resistant and Dust-proof Features Item Water Resistant Specifications IP-X2 11-2. Anti-static Electricity Features Item Anti-static Electricity Test Specifications Air discharge: ±10 kV Air discharge: ±15 kV Indirect discharge: ±19 kV IEC61000-4-2 compliant Notes No malfunction No destruction No malfunction Conditions Dropped from a height of 150 cm onto a concrete floor. Notes Once on each of 6 sides. 11-3.
OPL-2724 SS08057 14. Regulatory Compliance 14-1. Laser Safety • JIS C 6802: 2005 Class 1 • IEC825-1/EN60825-1: Laser class 1 • FDA CDRH Laser class 1. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50 dated July 26, 2001. Class 1 laser devices are not considered to be hazardous when used for their intended purpose. Avoid staring into the laser beam. 14-2. Product Safety • IEC60950-1 • EN60950-1 14-3.
OPL-2724 SS08057 16.
OPL-2724 SS08057 16-1. Individual Packaging Box Label Attach a label with the information listed below to the individual packaging box. OPL―2724 Model name *OF2OPL2724* OPL2724 * 1 2 3 4 5 6 Specification No. Item No. * Serisla No.
OPL-2724 SS08057 17. Packaging Specifications 17-1. Individual Packaging Specifications Put the OPL-2724 into a protective bubble bag and put it into the individual packaging box.
OPL-2724 SS08057 17-2. Individual Packaging Box Specifications Dimensions: 245 (W) x 110 (D) x 38 (H) mm Note: The ‘Ro’ mark on the inner and outer packaging indicates that this product does not use any materials, components or parts that are restricted under RoHS standards (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC). This is an internal determination by Optoelectronics and carries no legal weight in the EU.
OPL-2724 SS08057 18. Product Specification Changes Any changes to the product specifications stated in this manual shall be discussed in advance. 19. Warranty 19-1. Warranty Period Optoelectronics Co., Ltd. (hereinafter ‘Optoelectronics’) warrants that this product is free of defects and malfunctions for a period of 12 (twelve) months beginning on the last day of the month in which it is shipped.
OPL-2724 SS08057 20. Precautions 20-1. Laser-related Caution • Do not stare into the laser light from a scanning window. It may harm your eyes. • Do not point the laser directly at others’ eyes. It may harm your eyes. • Do not stare into the beam with optical instruments. It may harm your eyes. 20-2. For the Radio Equipment OPL-2724, a radio equipment for low power radio station of 2.
OPL-2724 SS08057 21. Bluetooth • • • • • • • Bluetooth® is a trademark owned by its proprietor and used by OPTOELECTRONICS Co., Ltd. under license. To communicate via Bluetooth, the divice which OPL-2724 is connected to, must support the same Bluetooth version and profile. OPL-2724 is compliant to Bluetooth standards. However, we cannot assure the connection between OPL-2724 and other Bluetooth devices which have not been tested. Bluetooth supporting devices use 2.4 GHz frequency band.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
