User's Manual

OPTICON
User's manual
H-15
5-1
Chapter 5. Software Applications
5.1 Introduction
The PDT includes several applications for example Calculator, email, etc.
You can switch to any software application by tapping the Start Menu.
5.2 Software Applications
5.2.1 Calculator
It can be used for basic calculations with “+”, “-“ “*” and “/“.
9 Procedure:
¾ Tap numeric number
¾ Tap one operator “+”, “-“, “*” or “/”
¾ Then, tap another numeric number
¾
Tap another operator or numeric number if needed
¾ Tap “=” to get result
9 Button Function:
¾
“MC” – Memory Clear : clear the memory
¾
“MS” – Memory Store : store the displayed value to memory
¾
“MR” – Memory Recall : Display the most recent stored value
¾
“M+” – Add stored numeric number into the displayed numeric value.
¾
“Backspace” – Same as “ backspace” key
¾
“CE” – Clear current keying numeric number. Same as “ Delete” key
¾
“C” – Clear the current calculation. Same as “ESC” key.
5.2.2 Inbox
Use Inbox to send and receive e-mail messages in the following ways:
9 Synchronize e-mail messages with Microsoft Exchange or Outlook on the Host
Computer.
9
Send and receive e-mail messages by connecting directly to an e-mail server through
an Internet server provider (ISP) or a network.
To setup “Inbox”:
9 Select Start> Programs> Inbox to open it.
9
Select Service> Options from the command bar. Drag the dialog to show the right
edge to configure e-mail.
9 Select “Add…” (Note 1)