User's Manual

OPTICON
User's manual
H-15
3-32
3.2.18 System
ICON ITEM & FUNCTION
z “General” Tab : (Figure 3-62)
9 To show:
¾
Firmware information
¾
Information about Processor type, Memory size,
Expansion card
z “Memory”: (Figure 3-63)
9 Move the slider to adjust memory allocation. Default
storage memory is normally set to about 8MB with the
reminder assigned to Program memory.
9 Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM
size in Information properties and total memory size of
storage memory and program memory
z “Device Name” Tab : (Figure 3-64)
9 Your device uses this information to identify itself to other
computers.
9
The input panel will open to facilitate data entry.
9 To close the Device Name, press the “OK” button, or press
the <Enter> key on keypad.
z “Copyrights” Tab: (Figure3-65)
9 Refer to this tab for specific copyright data. As a user, you
are responsible to read this statement.
Table 3-21 System