User's Manual

User Manual
OPTICON
Preliminary
Ve rsio n : 0.1
Da te : 96/ 07/ 10
107
Network The type of network your e-mail server connects to.
Incoming mail server The name of your e-mail server (POP3 or IMAP4).
Require SSL connection Select this to ensure you always receive e-mail for this account
using an SSL connection. This enables you to receive personal
information more securely. Please note that if you select this and
your ISP does not support an SSL connection, you will not be able
to connect to receive e-mail.
Outgoing mail server The name of your outgoing e-mail server (SMTP).
Outgoing server
requires authentication
Your outgoing e-mail server (SMTP) may require authentication.
Note: Your user name and password from above will be used.
Outgoing server
settings
Your outgoing e-mail server may require different authentication
settings than your incoming e-mail server.
Use different user
name for outgoing
server
A check box that lets you enter separate settings for your outgoing
e-mail server.
User name Your user name for the outgoing e-mail server.
Password Your password for the outgoing e-mail server.
Domain The domain name of the outgoing e-mail server.
Require SSL connection
(Outgoing mail server
only)
A connection that enables you to send personal information more
securely. Note that if you select this and your I SP does not support
an SSL connection, you will not be able to send e-mail.
Now you are ready to set up your account:
1. Ta p
> Messaging.
2. Ta p Menu > Tools > New Account.
3. Select your e-mail provider then tap Next.
4. Enter your e-mail address and tap Next.
5. On the Auto configuration setup page, tap Next. Auto conf iguration attempts to
obtain necessary e-mail server settings from your service provider.
6. If auto conf iguration was successful, the Your name and User name are
automatically f illed out for you. Tap Next and then tap Finish to complete the
account setup. If auto conf iguration was not successful, enter information above
appropriate until setup is complete.