User's Manual

User Manual
OPTICON
Preliminary
Ve rsio n : 0.1
Da te : 96/ 07/ 10
102
2. In Status tab, you can see information of link status, SSID, Signal strength…etc.
3. In I nfo tab, you can check values of servers and IP address and renew IP if needed.
4. In Advanced tab, you can refer to Wireless LAN MAC address and version information.
Configuring Wi-Fi Settings
You can conf igure wireless networks on your device, including adding new Wi-Fi connections
and editting currently available networks.
Creating Wireless Connections
1. Open Wireless Manager and then tap Settings > Wi-Fi Settings.
2. In Wireless tab, tap Add New … on the screen.
3. Enter the Network name and Network type and then tap Next. If you want to
connect to another device instead of a network through an access point, select This is a
device- to-device ( ad-hoc) connection.
4. Select Authentication type and Data Encryption and enter the Network key and
Key index if needed. Tap Next.
5. Select Use I EEE 802.1 x network access control to use EAP (Extensible
Authentication Protocol). Select EAP type: PEAP or Smart Card or Certificate.
The screen for wireless networks configure can only be accessed after a Wi-Fi network is
connected.