User Manual

X6R/V3R-TP 24 / 27 rev. 2.4
Technical Specifications
Analog Audio Mic Inputs
ADC
Impedance, Gain / steps Single and Dual 4.5kΩ -4 dB to +66 dB 1 dB steps
Maximum input level @ -4 dB Gain +22 dBu @ +66 dB Gain -48 dBu
SNR @ -4 dB Gain 122.5 dB(A) @ +66 dB Gain 81.5 dB(A)
THD+N @ -1dBFS @ -4 dB Gain ≤ -102 dB @ +40 dB Gain ≤ -100 dB
Analog Audio Line Inputs
ADC
Impedance, Gain / steps 10kΩ -9, -4, 0, +10 dB 4 steps
Maximum input level @ -9 dB Gain +27 dBu @ +10 dB Gain +8 dBu
SNR @ -9 dB Gain 127.5 dB(A) @ +10 dB Gain 108 dB(A)
THD+N @ -1dBFS @ -9 dB Gain ≤ -102 dB @ +10 dB Gain ≤ -102 dB
Analog Audio Line Outputs
DAC
Impedance, Gain / steps 22Ω +4, 0, -6, -10 dB 4 steps
Maximum output level @ +4 dB Gain +22 dBu @ -10 dB Gain +8 dBu
SNR @ +4 dB Gain 123 dB(A) @ -10 dB Gain 108 dB(A)
THD+N @ 0dBFS @ +4 dB Gain ≤ -100 dB @ -10 dB Gain ≤ -103 dB
Conditions
Reference 0dBFS ≡ 18dBu, Input / Output Termination 150R / 300R, Sample Rate
48kHz. Specs noticed as typical, if not otherwise stated
AES Ports
Convention EIA / TIA - 422
Channels
AES/EBU 2 x 8
Audio channels 2 x 16
Data rate
Depending on selected sample rate Up to 30 Mbit/s per channel
Impedance
Termination
120 Ω-switchable / ≥ 96 kΩ
Source ≤ 10 Ω, Multi-drop feature
Drive level
Output ≥ 2 V
pp
Zero level
Referring to GND + 1.7 V
Sense level
Input ≥ 400 mV
pp
CM-voltage at bus terminals
Referring to GND - 7 V … + 12 V
Word clock
Hardware standard BNC - 75 Ω
Data rate
Depending on selected sample rate Up to 192 kHz
Impedance
Output ≤ 5 Ω
Input 75 Ω
Drive level
Output ≥ 1 V
pp
Zero level
Referring to GND + 1.7 V
Sense level
Input ≥ 400 mV
pp
Remote Control
Convention
RS232
EIA / TIA - 232 57 600 Baud
USB
USB 2.0 - Device 12 Mbit/s
LAN
IEEE - 802.3 10/100 Mbit/s
SANE, LAN
Convention
Audio TIA - 568A/B, Optocore 200 Mbit/s
LAN TIA - 568A/B, IEEE - 802.3 10/100 Mbit/s
Power supply
Type
Switch-mode, universal input
Mains voltage
100 … 240 V
Frequency
50 … 60 Hz
Power consumption
Depending on device, 32VA - Max
Security classification
Class 1: basic insulation, connected to the protective grounding conductor
Security regulations
Harmonised European standard EN60065
Mains connector
acc. to IEC-950
Cooling
Passive, via surface and ventilation-slits on both sides