User Manual

X6R/V3R-TP 13 / 27 rev. 2.4
Front Panel
X6R-TP
V3R-TP
Word Clock LED: Indicates the selected word clock source:
INT: Internal word clock
BNC: External via BNC Input
DSUB: External via DSUB (available on request)
AES: External via AES (available on request)
SANE: External via SANE
Card and Signal Monitor for the 2 x 8 Channels (1 x 8 Channels for V3R)
A and B Card in slot A and B:
AES:
(only X6R, available on
request)
8 AES/EBU channels (16 audio) card
I/O switchable in groups of four
MIC IN:
8 channel microphone input card
SRC/DUAL:
(only X6R, available on
request)
8 AES/EBU inputs with sample rate converter/ 16 channel microphone input
card with 8 microphone inputs and two independent preamps each
LINE IN:
8 channel line input card
LINE OUT:
8 channel line output card
PEAK Red: Overflow, input level exceeds max. input level of 0dBFS
LEVEL Yellow: Warning level, input level exceeds -10dBFS
SIGNAL Green: Signal present ≥ -60dBFS, brightness controlled
Master LED: Indicates the master unit
LINK 1 LED: Communication is established via SANE 1 (rear panel)
LINK 2 LED: Communication is established via SANE 2 (rear panel)
Device ID Display: Indicates the identification number of the device
HEALTH LED: Green: Power supply is correctly working, temperature is below the limit
PWR 1 LED: Power supply 1 is working correctly
PWR 2 LED: Power supply 2 is working correctly