User Manual

M-Series 20 / 28 rev. 1.2
Standalone Application Example
An application example below displays the benefits of M12-OPT/BNC working as a standalone MADI router
device. M12-OPT/BNC is equipped with two MADI board each with four bidirectional MADI ports. Four of them
are coaxial, the rest four are optical with SC connectors. Video Router, DSP Processor, Playback System and
Intercom Matrix are connected to the optical MADI ports while, two OB VANs, Digital Audio Workstation and
Digital Mixing Console are connected to the BNC MADI ports.
OPTOCORE CONTROL SOFTWARE controls single channel routing, channel naming as well as quick stream
switching using Macros. Each channel can be routed from any input to any output of the MADI switch, this also
enable passive input to multiple outputs splitting. Each MADI port can be adjusted individually as a ASE10-1991
or AES10-2003 with 56 or 64 I/O channels. RS232, USB or LAN can be used for a configuration connection. M12
has a build in Fast Ethernet four-port switch.
As an addition M12 device is equipped with two power supplies with automatic switchover mechanism to prevent
power malfunction.
Fig. 1: A standalone application example of M12-OPT/BNC device