User Manual

M-Series 15 / 28 rev. 1.2
RS485: 4 x RS485/RS422 (D-Sub-9) auxiliary port for data transmission
Word Clock IN: BNC Word clock input allowing synchronization of Optocore devices/network
from an external word clock source
Word Clock OUT: BNC Word clock output for synchronization of external devices
MADI PORTS: M12-OPT 8 x SC multi/single-mode optical MADI inputs and
8 x SC multi/single-mode optical MADI outputs
M12-BNC 8 x coaxial BNC MADI inputs and
8 x coaxial BNC MADI outputs
M12-OPT/BNC 4 x SC multi/single-mode optical MADI inputs and
4 x SC multi/single-mode optical MADI outputs
4 x coaxial BNC MADI inputs and
4 x coaxial BNC MADI outputs
M8-OPT 4 x SC multi/single-mode optical MADI inputs and
4 x SC multi/single-mode optical MADI outputs
M8-BNC 4 x coaxial BNC MADI inputs and
4 x coaxial BNC MADI outputs
POWER 2: Mains input for power supply 2 (100 … 240 V)
POWER 1: Mains input for power supply 1 (100 … 240 V)
SANE 1: SANE RJ-45 interface for data transmission + 100 Mbit Ethernet
SANE 2: SANE RJ-45 interface for data transmission + 100 Mbit Ethernet
LINK 1: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP multimode transceiver included, singlemode transceiver option available
on demand)
LINK 2: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP multimode transceiver included, singlemode transceiver option available
on demand)
LAN 1: 100 Mbit RJ-45 Ethernet interface
LAN 2: 100 Mbit RJ-45 Ethernet interface