Integration Manual

GTM353W Integration Manual
Author:
R
. Claessens
Version:
4.0 Draft 2
Creation Date:
September 20, 2006
Page:
43 of 52
Option Confidential:
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
6.10.4 Selected System “AT_OSSYS”
Command Possible Response(s)
_OSSYS=[<n>] OK
_OSSYS? _OSSYS: <n>,<AcT>
_OSSYS=? _OSSYS: (0-1),(0,2)
Description
This command enables/disables the unsolicited result code _OSSYSI: <mode>.
Defined values
<n>:
0 Turns off unsolicited result code _OSSYSI: <mode> (default)
1 Turns on unsolicited result code _OSSYSI: <mode>
<AcT>:
0
GSM
2 UTRAN
3 No service
6.10.5 Aircraft Mode “AT_OAIR”
Command Possible response(s)
_OAIR= < aircraft mode> OK
_OAIR? _OAIR: < aircraft mode>
_OAIR=? _OAIR: (list of supported <mode>’s)
Description
Allows the user to change the startup RF of the gsm/wcdma part (protocol stack) at power up
setting or query its current state.
Defined Values
<Aircraft mode>
0 Off, the unit will startup protocol stack at power up (gsm/wcdma part). (default)
1 On, the unit will NOT startup the protocol stack at power up (gsm/wcdma part).